The beginning of the closure table for this circuit is shown as follows.



On

1

1

1

0

1

0

1

0

0

Draw a circuit similar to the preceding for the other three rows of the closure table.

To assist you with drawing the rest of the circuit, let's first break down the closure table that you’ve provided and understand the context of the rows:

You provided this partial table:

\[
\begin{array}{c|c}
\text{On} & 1 \, 1 \, 1 \, 0 \, 1 \, 0 \, 1 \, 0 \, 0 \\
\end{array}
\]

The task is to draw a circuit corresponding to these values and then extend the circuit for the remaining rows of the closure table.

### Circuit Explanation (for the first row):
Each column in the row could represent inputs or states of logical gates (AND, OR, NOT, etc.). Typically, the values “1” and “0” in such tables represent high (true) and low (false) logic levels.

1. **Inputs and Outputs:** 
    - The "On" part (e.g., the state of the circuit) might be determined by combining logic from various gate outputs (1, 1, 1, 0, 1, 0, 1, 0, 0).
    - Each “1” or “0” represents the output of a gate at a certain point in the circuit.
  
2. **Drawing a Circuit:**
    - **Step 1:** Begin by identifying what each input represents. Suppose each position corresponds to a switch or input signal.
    - **Step 2:** Connect logical gates based on the positions of "1"s and "0"s. For example:
      - Connect inputs where needed to get a "1" output (using AND, OR, NOT gates).
      - For positions where the result is "0", use NOT gates or combinations that result in false.

3. **Remaining Three Rows:**
    To draw the circuit for the remaining rows, follow these steps:
    - Determine the logical operations for each row.
    - Ensure that the combination of gates reflects the "1"s and "0"s for each row.
    - For example, if the second row has values like "1 0 1 1", then construct the circuit so that the final output corresponds to this pattern.

Unfortunately, since I can't visualize the full closure table, I will need the exact structure of the other three rows to provide a more specific answer for the circuit design.

Could you upload or share more details of the closure table? Then I can provide a more accurate design.

---

### Questions for Better Understanding:
1. What specific logic gates are you working with in this circuit?
2. Can you provide the full closure table with the remaining rows?
3. Are there any constraints or conditions on the gates for this circuit?
4. Do the "1" and "0" values correspond to specific inputs or outputs in the circuit?
5. Should this circuit simplify into a specific type of gate network (AND/OR combinations)?

**Tip:** In logic circuits, **truth tables** help design the network of gates by clearly showing how inputs map to outputs. You can use software like **Logisim** to visualize these circuits.

The beginning of the closure table for this circuit is shown as follows.

On
1
1
1
0
1
0
1
0
0

Draw a circuit similar to the preceding for the other three rows of the closure table.

Learn how to design a logic circuit based on a closure table. This problem covers key concepts in Boolean algebra, logic gate operations (AND, OR, NOT), and truth tables. Suitable for students in Grades 10-12.

Math Problem Statement

Solution

Ask a new question for Free

By Image

Math Problem Analysis

Mathematical Concepts

Formulas

Theorems

Suitable Grade Level

Related Recommendation